So I get the router, boot in recovery mode; Reset NVRAM and load the firmware with shibby 140. Everything is good and dandy. But if I plug it into my a-plug-in modem, it can`t renew WAN DHCP and I get a number of ioctl messages regarding Wi-Fi. When I go to the Mac address page, I see that all Wi-Fi addresses are the same, as well as the WAN MAC. I`ve had this router for two years, and I`ve changed several times between the Merlin firmware and the tomato shibby. I like the QoS adaptive that offers Merlin`s firmware, but running an adblocker at the router is more important to me than the adaptive QoS. I first flashed at Shibby 138 (don`t remember them), then went to 140 AIO, didn`t have any real problems. It makes a mistake a bit if you try to reverse ethernet port labels that are default upside down. I think it is a well-known subject.
Otherwise, I did it with DualWAN and for a large part, its pretty solid rock! Device: RT-AC3200Firmware: Tested with Shibby 140 MultiWAN AIO – Advanced Tomato 140 To disconnect the connection to the VPN server, just click on one of the Client Settings 1 tabs. Protect your router and all connected devices without any problems! This tutorial provides you with a step-by-step guide on how to set up an OpenVPN client® on your router with the Tomato firmware (Asus RT-N66U router with tomato firmware 1.28.0000 MIPSR2-140 K26AC USB AIO-64K was taken as an example). So, I put NVRAM back and flashed back into the ASUS stock firmware. It works; I`m going to re-establish. Start recovery, download firmware. The router appears to enter a priming loop. I tried the 30/30/30 with the reset key, as well as starts while you use the WPS key. Update:I this link found: www.reddit.com/r/TomatoFTW/comments/7n3bt4/help_with_installation_on_asus_rtac3200/ds5szva/ I come to see you with a small problem I had. I recently bought an ASUS RT-AC3200 router. Looks like a great router, and upon purchase, I had planned to put tomatoes on them. Looking for a secure VPN service accessible to your Asus router? They found it! Get KeepSolid VPN Unlimited now, set it up on the router with Tomato firmware and improve your online privacy! Any idea what`s going on? As an indication, after downloading Tomato on recovery, I leave the router sitting, not touching, and it starts the start loop without my intervention. The 2.4 – 5GHZ lights never arrive.
You have successfully set up the OpenVPN client® and have a VPN connection going on your Tomato Asus router with the Tomato firmware. Tell me what turned out to be.